Capture and contain
The solvent is captured as close as possible to its emission, before it spreads through the workshop and exposes operators.
- Extraction booths
- Hoods and capture at the workstation
- Enclosure of application areas
04 / GASES & VOCs
Solvents and vapours.
Captured, extracted, treated.
Solvents, process vapours, vehicle and machinery exhaust gases: we capture these pollutants at the source, extract them and, where needed, treat the air before discharge.
04gases & VOCs
500–10 000m³/h of VOC treatment
ATEXversions on request
Capture at the workstation
The solvent captured before it spreads
Suitable treatment
Chosen according to the product and concentrations
ATEX safety
Defined with your risk assessment
Engineering office
From the workstation to the discharge point
THE POLLUTANTS
Invisible, but very real.
VOCs and gases can't be seen like dust: they spread quickly, build up and expose the whole workshop. Controlling them starts at the point of emission.
Have my workshop assessed-
Paints, adhesives, inks, cleaningSolvents and VOCs
Vapours released during application, mixing, drying or cleaning of tools and parts.
-
Chemicals, laboratories, bathsProcess vapours
Emissions from tanks, reactors, treatment baths and laboratory workstations.
-
Vehicles and machineryExhaust gases
Engines running in maintenance, inspection or preparation workshops.
OUR SOLUTIONS
Capture, extract, treat.
Three levers, combined according to the product, the workstation and your site's discharge requirements.
Extract exhaust gases
Gases are extracted directly at the tailpipe, then discharged outside the building without polluting the work area.
- Maintenance workshops
- Cars, heavy goods vehicles, machinery
- Discharge outside
Treat the air before discharge
Depending on the product and concentrations, the extracted air is treated before discharge, for example with a wet process.
- Wet filters
- Treatment chosen according to the product
- 500 to 10,000 m³/h
OUR METHOD
Start from the product, not the equipment.
For solvent vapours, effectiveness depends on capture at the workstation, any enclosure and the treatment chosen.
- 01Identify the products
Safety data sheets, concentrations, temperatures and emission times.
- 02Capture and contain
Booth, hood or capture device: the system is chosen according to the workstation and the task.
- 03Choose the treatment
Direct discharge or air treatment, depending on the product and discharge requirements.
- 04Size and secure
Network, fan and, if needed, ATEX version based on the risk assessment.
INDUSTRIES EQUIPPED
Inks and paints
Pharmaceuticals
Cosmetics
Crop protection
Also Chemicals · Laboratories · Automotive · Machinery maintenance
CAPTAIR & DIMAVENT / ENGINEERING OFFICE
Which products do you use?
Let's talk about your air.
Type of solvents, workstations concerned, volumes and discharge constraints: send us these details, and if possible the safety data sheets, to start the study.